Home Page > Pumps > Double suction pumps DSP

Double suction pumps DSP

This pump is single layer horizontal centrifuge with spiral compartment. The pump’s compartment has the axial section which easily enables the replacement of moving parts and abrasive rings have been mounted on the compartment.

Driving flanges and suction pump are attached to the lower half of the compartment and both flanges are located parallel to the center (linear pump). The pump’s propeller is of radial type, closed, with two entries for the fluid. In this type of propeller, axial force is predominantly absent and the propeller has been balanced statically and dynamically according to ISO 1940.

The pump’s axis is totally sealed against the pumped fluid and there are protective covers on the axes at the seals. The pump’s bearings on every side are composed of a ball bearing with a deep furrow which has covers and they do not need lubrication during the life time of the ball bearing.

Usages of Double Suction Pump

Irrigation pumping stations
Trenching- power plants- industrial water supply systems
Sewage systems and petrochemical industries
Firefighting applications
Marine applications
General applications in the power plants

General Characteristics of Double Suction Pump

Output diameter: 80 to 350 millimeters
Irrigation capacity: 90 to 3600 cubic meters per hour (up to 800 liter per second)
Altitude: up to 200 meters
Working temperature: up to 105 degrees Celsius
Test pressure: up to 25 bars

Overlap Graph of the Double Suction Pump and Receiving Guide Files

Request For Information

Services