Buoyancy Pump

Single or multiple-layer buoyancy pump has single suction, with compartment of radial section. It is mounted vertically but in some cases depending on the number of layers and the size of motor; it can be mounted horizontally or obliquely.

The propellers are radial or mixed, and they are open to turnery. The compartment for layers of radial-flow pumps and the compartment for layers of mixed-flow pumps are attached to each other, with layer clinches and reciprocal screws respectively. Suction compartment between the motor and pump, protects the pump against the particles in the water by a suction filter. The pumps usually have a one-sided valve.

Applications of Buoyancy Pump

In order to increase the functional efficiency and durability, and considering the studies regarding the properties of pumped waters; these electro motors have been divided into three different categories:

Transferring clean water with low salts for irrigation purposes
Under pressure irrigation systems for agriculture
Relay stations
Supplying emergency water
Drainage of underground waters
Water refining installations
Industrial rinsing and firefighting applications
Mines and fountains applications
The permissible amount of sand in pumped water is 25 grams per cubic meter.

General Characteristics of Buoyancy Pump

Nominal diameter for the 1/2 valve: 1 to 8 inches
Irrigation capacity: 5 to 650 cubic meters per hour
Altitude: up to 300 meters
Temperature of pumped water: up to 30 degrees Celsius

Overlap Graph of Buoyancy Pump and Receiving Guide Files

Request For Information

Services